Files
membank/auto-check/run.log
12600k-rog-d4 2aaaa16ae2 0813
2026-08-13 22:49:50 +08:00

143 lines
9.3 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
[配置] 加载完成: 网段=10.0.3.0/24 间隔=3m0s 压测=cpu,memory,disk,full
══ 工作流启动(间隔 3m0s设备以 IP 为 key══
════ 轮次开始 [13:42:10] ════
[扫描] 网段 10.0.3.0/24共 254 个IP10 并发 ping 探测...
[扫描] 完成,发现 11 台存活设备
[扫描] 设备 11 台
[测试] 10.0.3.1 () 开始压测...
[测试] 10.0.3.1 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.1:22 失败: dial tcp 10.0.3.1:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.104 () 开始压测...
[测试] 10.0.3.104 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.104:22 失败: dial tcp 10.0.3.104:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.123 () 开始压测...
[测试] 10.0.3.123 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.123:22 失败: dial tcp 10.0.3.123:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.152 () 开始压测...
[测试] 10.0.3.152 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.152:22 失败: dial tcp 10.0.3.152:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.147 () 开始压测...
[测试] 10.0.3.147 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.147:22 失败: dial tcp 10.0.3.147:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.148 () 开始压测...
[MAC] 10.0.3.148 -> fe:49:6a:ab:e1:79
════════ [10.0.3.148] 压力测试开始 ════════
工具: stress-ng(stress-ng, version 0.15.06 (gcc 12.2.0, x86_64 Linux 6.18.18.c877-trim)) iperf3(iperf 3.12 (cJSON 1.7.15)) fio(fio-3.33)
指标: cpu memory disk full dmesg
[脚本] 拼装完成10334 字节
[报告] reports/report-10.0.3.148.html
════════ [10.0.3.148] 压力测试完成 ════════
══ [10.0.3.148] 压力测试报告 ══
耗时: 2m18.501s
✓ cpu pass
跑分: 1285.6 ops/s
最高温度: 57.0°C
平均CPU利用率: 99.1%
stress-ng: info: [3652909] Working directory / is not read/writeable, some I/O tests may fail
stress-ng: info: [3652909] setting to a 30 second run per stressor
stress-ng: info: [3652909] dispatching hogs: 4 cpu
stress-ng: metrc: [3652909] stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
stress-ng: metrc: [3652909] (secs) (secs) (secs) (real time) (usr+sys time)
stress-ng: metrc: [3652909] cpu 38577 30.01 90.66 0.43 1285.60 423.51
stress-ng: info: [3652909] successful run completed in 30.02s
✓ memory pass
跑分: 33472.4 ops/s
最高温度: 58.0°C
峰值内存使用率: 57.1%
stress-ng: info: [3653312] Working directory / is not read/writeable, some I/O tests may fail
stress-ng: info: [3653312] setting to a 30 second run per stressor
stress-ng: info: [3653312] dispatching hogs: 4 vm
stress-ng: metrc: [3653312] stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
stress-ng: metrc: [3653312] (secs) (secs) (secs) (real time) (usr+sys time)
stress-ng: metrc: [3653312] vm 1006646 30.07 47.26 5.75 33472.37 18990.03
stress-ng: info: [3653312] successful run completed in 30.28s
✓ disk pass
跑分: 445.0 MB/s
读IOPS: 77.0
写IOPS: 34.0
总IOPS: 111.0
读吞吐: 309.0MB/s
写吞吐: 136.0MB/s
总吞吐: 445.0MB/s
autocheck: (g=0): rw=randrw, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=psync, iodepth=32
fio-3.33
Starting 1 process
autocheck: Laying out IO file (1 file / 1024MiB)
note: both iodepth >= 1 and synchronous I/O engine are selected, queue depth will be capped at 1
autocheck: (groupid=0, jobs=1): err= 0: pid=3653771: Thu Aug 13 13:44:37 2026
read: IOPS=77, BW=309KiB/s (317kB/s)(9276KiB/30005msec)
clat (usec): min=253, max=830522, avg=11740.11, stdev=28335.80
lat (usec): min=255, max=830525, avg=11742.04, stdev=28335.81
clat percentiles (msec):
| 1.00th=[ 4], 5.00th=[ 5], 10.00th=[ 6], 20.00th=[ 7],
| 30.00th=[ 8], 40.00th=[ 9], 50.00th=[ 11], 60.00th=[ 12],
| 70.00th=[ 13], 80.00th=[ 14], 90.00th=[ 15], 95.00th=[ 16],
| 99.00th=[ 59], 99.50th=[ 65], 99.90th=[ 676], 99.95th=[ 802],
| 99.99th=[ 835]
bw ( KiB/s): min= 28, max= 420, per=98.98%, avg=306.62, stdev=113.30, samples=29
iops : min= 7, max= 105, avg=76.55, stdev=28.40, samples=29
write: IOPS=34, BW=136KiB/s (140kB/s)(4088KiB/30005msec); 0 zone resets
clat (usec): min=131, max=841470, avg=2638.71, stdev=36403.27
lat (usec): min=131, max=841473, avg=2641.68, stdev=36403.26
clat percentiles (usec):
| 1.00th=[ 188], 5.00th=[ 269], 10.00th=[ 318], 20.00th=[ 383],
| 30.00th=[ 449], 40.00th=[ 506], 50.00th=[ 586], 60.00th=[ 685],
| 70.00th=[ 824], 80.00th=[ 979], 90.00th=[ 1254], 95.00th=[ 1483],
| 99.00th=[ 9372], 99.50th=[ 15270], 99.90th=[767558], 99.95th=[843056],
| 99.99th=[843056]
bw ( KiB/s): min= 8, max= 211, per=99.09%, avg=135.72, stdev=55.82, samples=29
iops : min= 2, max= 52, avg=33.83, stdev=14.03, samples=29
lat (usec) : 250=1.11%, 500=10.72%, 750=8.20%, 1000=5.00%
lat (msec) : 2=4.88%, 4=1.65%, 10=33.49%, 20=33.10%, 50=0.57%
lat (msec) : 100=1.11%, 250=0.03%, 750=0.03%, 1000=0.12%
cpu : usr=0.46%, sys=2.25%, ctx=3357, majf=0, minf=13
IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
issued rwts: total=2319,1022,0,0 short=0,0,0,0 dropped=0,0,0,0
latency : target=0, window=0, percentile=100.00%, depth=32
Run status group 0 (all jobs):
READ: bw=309KiB/s (317kB/s), 309KiB/s-309KiB/s (317kB/s-317kB/s), io=9276KiB (9499kB), run=30005-30005msec
WRITE: bw=136KiB/s (140kB/s), 136KiB/s-136KiB/s (140kB/s-140kB/s), io=4088KiB (4186kB), run=30005-30005msec
Disk stats (read/write):
sda: ios=2319/1057, merge=0/81, ticks=26764/7589, in_queue=38611, util=97.50%
✓ full pass
跑分: 40708.6 ops/s
最高温度: 58.0°C
平均CPU利用率: 95.8%
峰值内存使用率: 51.2%
stress-ng: info: [3653901] Working directory / is not read/writeable, some I/O tests may fail
stress-ng: info: [3653901] setting to a 30 second run per stressor
stress-ng: info: [3653901] dispatching hogs: 4 cpu, 4 vm, 2 iomix
stress-ng: metrc: [3653901] stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
stress-ng: metrc: [3653901] (secs) (secs) (secs) (real time) (usr+sys time)
stress-ng: metrc: [3653901] cpu 22552 30.02 54.07 0.35 751.21 414.42
stress-ng: metrc: [3653901] vm 1193352 30.01 45.94 3.66 39767.94 24057.59
stress-ng: metrc: [3653901] iomix 5692 30.04 2.13 4.02 189.48 924.72
stress-ng: info: [3653901] successful run completed in 30.08s
✓ dmesg pass
无硬件相关内核报错
共 5 项: 5 通过, 0 失败, 0 跳过, 0 错误
[测试] 10.0.3.162 () 开始压测...
[测试] 10.0.3.162 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.162:22 失败: dial tcp 10.0.3.162:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.119 () 开始压测...
[测试] 10.0.3.119 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.119:22 失败: dial tcp 10.0.3.119:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.160 () 开始压测...
[测试] 10.0.3.160 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.160:22 失败: dial tcp 10.0.3.160:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.171 () 开始压测...
[测试] 10.0.3.171 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.171:22 失败: dial tcp 10.0.3.171:22: connectex: No connection could be made because the target machine actively refused it.
[测试] 10.0.3.236 () 开始压测...
[测试] 10.0.3.236 SSH 连接失败,跳过报告输出: SSH 连接 10.0.3.236:22 失败: dial tcp 10.0.3.236:22: connectex: No connection could be made because the target machine actively refused it.
[状态] 10.0.3.160 ✗ → fail
[状态] 10.0.3.236 ✗ → fail
[状态] 10.0.3.1 ✗ → fail
[状态] 10.0.3.104 ✗ → fail
[状态] 10.0.3.147 ✗ → fail
[状态] 10.0.3.119 ✗ → fail
[状态] 10.0.3.171 ✗ → fail
[状态] 10.0.3.123 ✗ → fail
[状态] 10.0.3.152 ✗ → fail
[状态] 10.0.3.148 (fe:49:6a:ab:e1:79) ✓ → pass
[状态] 10.0.3.162 ✗ → fail